Electrical installations
From Intelligent Lighting control integration, to complete systems, including solar and battery storage, and EV charge point installation.
All Tools Great & Small was acquired and is now fully integrated into Wellington Wallace Renewables.
- Lighting Control
- KNX Integration
- Building Management
- Heating & MVHR Tie-in
- Off-site Programming
- What we do
Lighting Control
Create personalised scenes to adjust lighting and adapt the atmosphere to your needs. Adjust lighting,ambiance with a single touch, creating the perfect atmosphere for every occasion.
Energy Monitoring
Energy consumption under control
Reduce energy consumption by up to 60% by automatically adjusting climate settings based on the status of doors and/or windows
• Electricity, water, and gas
• Consumption visualisation allowing end users to make efficient use of energy
• Automatic operation based on consumption
Smart climate control
Shading Solutions & Ventilation Control
Optimise home comfort by automatically and efficiently adjusting temperature and natural light
• Control of air conditioning systems
• Mechanical ventilation control
• Air quality and humidity management
Manage the climate globally or individually in each room, ensuring efficient and personalised comfort Blinds, curtains and shades Automated blinds and curtains to optimise comfort and efficiency
Support & Maintenance
Surveillance, Alarms, Video Intercom & Access Control
Manage door opening and video intercom directly from your smartphone. set up to four different access codes for guests, and modify them at any time via the app or directly from the installation View and control all IP cameras and property sensors directly from the app no matter where you are. Provide guests with a door access code generated through the app or directly from the home’s touch panel
Schedule actions
Program scenes or actions to automate and adapt the home to every moment of the day, adapt to natural light levels to reduce glare.
• Control of blinds, curtains and awnings
• Avoid solar damage to interiors
• Adjustment according to energy management needs
• Scene integration
Inspection & Testing
• Fault finding & rectification
• Electrical inspection condition Reports(EICR)
• In-service inspection & testing(PAT)
Solar PV, Solar Thermal and Battery Storage
• Solar PV panel installation
• Solar thermal systems
• Battery storage systems
• Energy backup solutions
• Smart energy management
• Renewable energy integration
- Beyond apps & voice control
A home that works for you quietly, in the background.
Of course you get a single app and voice control. But a properly designed and integrated system runs far deeper than that and it’s an investment that pays back over the life of the home.
Increase property value
Considered, professionally integrated control puts a home beyond the norm a quality buyers notice, and a system that adapts without invasive rewiring later.
Simplicity & style
One button recalls a whole lighting scene; the same elegant keypad can handle blinds, ventilation and temperature fewer controllers cluttering the wall, in finishes that suit the room.
Greater comfort
Each room held at exactly the right temperature, light and ventilation bedrooms cooling and blinds lowering as evening draws in, all without you lifting a finger.
Energy efficiency
Accurate room-by-room heating, smart use of solar gain and shading, and energy monitoring that shifts heavy loads to the cheapest times savings that compound year after year.
Future-ready & versatile
Built on open standards, the system is easy to extend and reconfigure for years it evolves with the home rather than going out of date.
- Built on KNX
One open standard.
Every system in sync.
KNX is the worldwide standard for home and building control. Lighting, heating, blinds, ventilation, security, audio and energy all speak the same language over a single bus cable regardless of who made each component. With 500+ manufacturers building certified products, you’re never locked to one supplier, and adding to the system means minimally invasive work.
500+ manufacturers
1 bus cable
30+ years proven
Vendor independent
Thousands of certified products from hundreds of manufacturers, all interoperable on one bus.
Future proof
An open, decades proven standard you can extend and reconfigure for years not a closed app that’s obsolete in three
Genuinely efficient
Co-ordinated lighting, heating and shading means the home only uses energy where and when it’s actually needed.
- How we work
A calm, measured route from drawing to handover.
The same manufacturer level discipline we bring to heat pumps and MVHR, applied to your electrical and control system.
STEP 01
Discovery
A time to listen. We learn how you live and shape your vision into a clear specification, with an indication of budget.
STEP 02
Design
We add granular detail with you and your architect, then produce the drawings, schedules and instructions your contractors need.
STEP 03
Supply & Configure
While the electricians run cable on site, panels are pre-built, programmed and bench tested in the calm of the workshop.
STEP 04
Commissioning
Switches, touchscreens and sensitive parts are fitted with care, then everything is tested room by room until it behaves perfectly.
STEP 05
Completion
A walk-through handover and full O&M pack then ongoing support and servicing for the long term.
- Supply & Configure
Configured off site. Commissioned with confidence.
Smart-home hardware is sourced, assembled and programmed in the calm of the workshop, not improvised in a half-built house. It arrives on site as a complete, tested system, ready to install.
Panels built, labelled and programmed before delivery
Bench-tested logic and scenes fewer surprises on sit
Cleaner installs and shorter, more predictable site timet
Documented configuration you can build on later
- Supply & Configure
Configured off-site. Commissioned with confidence.
Smart-home hardware is sourced, assembled and programmed in the calm of the workshop, not improvised in a half-built house. It arrives on site as a complete, tested system, ready to install.
Panels built, labelled and programmed before delivery
Bench-tested logic and scenes fewer surprises on sit
Cleaner installs and shorter, more predictable site time
Documented configuration you can build on later
- Electrical and Controls
Practical systems designed around the property
Accreditations and Standards
frequently asked questions
No. Because we design on the open KNX standard, the system is built to grow. We'll scope a sensible starting point with you and your architect, and you can extend lighting scenes, heating control or additional rooms later without ripping anything out.
Yes that's our advantage. As heat pump, MVHR and renewables specialists, we tie the control system into your wider home services so lighting, heating, ventilation and energy all co-operate rather than fighting each other.
Absolutely. We're used to acting as the technical control partner on a project providing design review, configured hardware and on-site commissioning that fits around your existing team and programme.
We work across Newcastle, Northumberland, Durham, Cumbria and the Scottish Borders, with wider coverage of Yorkshire, Lancashire, Greater Manchester and beyond by appointment.
Building and bench-testing panels in the workshop means logic and scenes are proven before delivery. That gives a cleaner install, shorter site time and far fewer surprises during commissioning.
There's no one-size-fits-all answer budgets vary widely with the size and scope of the project. Share your plans and answer a few questions and we can give you a rough indication of price quickly, then refine it as the design develops.
Our design, supply and commissioning service is built to support any competent electrician, so you're free to use your preferred contractor or main contractor's team. We provide the drawings, schedules and technical support they need to install our systems with confidence.
We design on KNX precisely because it's future-proof a tightly regulated open standard with hundreds of participating manufacturers. Where a wired device isn't practical, we use wireless, battery-free EnOcean devices so the system stays clean and low-maintenance.
Planning a smart home?
Start with the right design.
Book a design consultation and we’ll talk through your
project, your architect’s plans and the control system that fits.
project, your architect’s plans and the control system that fits.